In terms of new project development, have you encountered any of these difficulties when choosing electronic connector products?

Only know the spacing is not clear structure or only a general connection, current requirements, do not understand the specific model needed these factors will reduce the efficiency of selection.

Although there are many manufacturers of electronic connectors and their products have detailed specifications, it is still difficult to provide a suitable product for a predetermined circuit or system. Therefore, it is necessary to understand the knowledge content of the following electronic connector products.

1. Connection mode: The first step in selecting an electronic connector may be to define the purpose of the connector product, such as board to board, wire to circuit board, wire to wire (air connection)) connection mode.

2, electrical performance requirements: The current required by the connector will tend to control many overall characteristics, low current connectors are often different from the connector process required to carry high current, the current that the connector needs to carry is one of the important elements in choosing the connector. If high current levels are envisaged, certain types of connectors will be appropriate, and these tend to be larger, plus more sophisticated connectors can be used for situations where low current levels are required.

3, space and structure requirements: connector available shape and space also depends on the overall product design scheme structure, connector spacing size, size height will be affected.

4, application environment requirements: Environmental requirements can play an important role in the selection of any connector, many connectors are only suitable for benign environment, while others may need to meet the temperature, humidity, vibration, corrosion resistance and other application environment.

5, under conditions operation requirements: In the special circumstances of some equipment operation, also need long-term sealed, waterproof connector, to reduce the impact of moisture entry and to achieve waterproof standards, these need to be considered as part of the selection decision process.