The power plug in the use of heat is often a phenomenon, such as the common mobile phone charger, when your phone is charging, charge the plug, you will find that the charger plug is very hot, so what is the cause of the plug in the use of heat?

Standard plug manufacturers analyze people verbally say the so-called avoid hot plug, in fact, is the problem of plug wiring, so in the manufacturing process of the power line plug, must do a good job of wiring, plug to meet the tight, no stack, no twists and turns, no cracks, surface without high and low requirements, as far as possible the power plug to do perfect.

The impact of different inserts should be operated through various molds of different sizes and different shapes of American standard QP3 plug wholesale. To match the number, what kind of insert with what kind of mold, if you use other models of mold to punch the corresponding insert, there will be loose, copper exposure and other problems, so it must be corresponding production.

Like big South Africa a kind of power plug, the terminal is relatively large, it needs a little thick copper wire to fix, but if the customer requires a relatively small wire diameter, then how to deal with it? You can increase the length of the copper stripping, and then fold the copper wire in half to increase the thickness of the copper wire, so that the terminal can be firmly punched, will not be loose, but also for the next manufacturing process.

For example, the British assembly plug, in the work of the first to pay attention to the copper head of the power line, and then the steps of assembly. In the assembly process, we should pay attention to the length of the power cord into the plug, but also pay attention to the degree of screw tightening, if too loose, the upper and lower cover of the plug will move. To sum up, find the cause of the plug heat, if not the cause of current overload, then the plug itself.